Page 22 - ProStar Product Guide

GAS EQUIPMENT

™
ProStar Brass Fittings & Adaptors

Select an adaptor carefully to ensure that regulators and other equipment
ProStar adaptors safely connect
are only used with compatible gases and pressure ratings. A mixture of
a regulator to a cylinder, or other
non-compatible gases in any system is a possible hazard. Regulators
equipment, when different CGA
and all other parts of an adapted system must be thoroughly purged of all
threads on the mating parts make
a direct connection impossible. contaminants, especially organic material and residual gases. Replace worn
or damaged fittings immediately to ensure safe and dependable operation.

Part No. Part No.
PRS27103 PRS27105
From cylinder service From cylinder service
CGA-510 POL acetylene CGA-200 “MC” acetylene
To regulator service To regulator service
CGA-520 “B” tank CGA-510 POL acetylene

VALVED “Y” CONNECTIONS
B-size F Inlet to B-size M Outlets

Part No. Description Part No. Part No.
PRS27101 Acetylene/fuel gases LH PRS27107 PRS27108
PRS27100 Oxygen RH From cylinder service From cylinder service
CGA-300 acetylene CGA-320 carbon dioxide
Pressures up to 200 psig (1400 kPa). To regulator service To regulator service
Use with two cutting or welding CGA-510 POL acetylene, 1 pc CGA-580 nitrogen
torches at once. Precision shut-off
valves. B-size 9/16” (14.3 mm) - 18
thread.

Part No.
Part No.
WARNING: PRS27102
PRS27106
Adaptors should never be used From cylinder service From cylinder service
for a permanent installation. For CGA-510 POL acetylene
CGA-510 POL acetylene
long-term use, the appropriate To regulator service
To regulator service
CGA regulator should be used on CGA-410 acetylene
CGA-300 acetylene, 1 pc
all cylinders and gas systems.

Part No. Part No.
PRS27104 PRS27109
From cylinder service From cylinder service
CGA-520 “B” tank acetylene CGA-580 nitrogen
To regulator service To regulator service
CGA-510 POL acetylene CGA-320 carbon dioxide

A18 1-800 225 8247 www.praxairwelding.com