Page 154 - ProStar Product Guide

WELDING ACCESSORIES

ProStar Lube Pad, Leak Test, Zinc Spray
™

ProStar Wire Lube Pads

Pre-treated replacement pads reduce friction in wire feed
units. Pads are coated to remain wet without containing
excess liquid. Non-irritating, non-toxic, odorless and methylene
chloride-free pads eliminate health and safety concerns.
Part No. Description
PRS50007 6 pads and 1 clip
PRS50005 25 pads and 1 clip
PRS50009 Untreated pads for aluminum, 6 pads and 1 clip
PRS50004 8 oz (236 ml) wire feed relubrication solution
PRS50102 6 round, premium treated pads with 6 clips Relubrication
PRS50103 6 round, premium untreated pads with 6 clips Solution
PRS50004

CORROSION
PROTECTION

Zinc Galvanizing Spray

Provides excellent corrosion
protection on welds, galvanized
ProStar Leak Test Solution steel, base iron and other ferrous

Formulated to test pressurized gas and air systems including oxygen, surfaces exposed to harsh
acetylene, propane, butane and LPG. Check fittings, regulators, environments. As a high-quality
cylinder valves, hose connections and safety devices. Low temperature product that meets MIL-P-21035,
leak test can be used below freezing and on cryogenic systems. All the high zinc content ensures a
products are ammonia free and do not promote stress crack corrosion. bright, shiny protective finish.
Halogen and chloride free – safe for nickel, stainless steel, etc. (ASME
Part No. Description
V). Meets MIL-PRF-25567E – oxygen approved and safe. Each 8 12 oz (340 g) spray,
PRS50213
oz (236 ml) bottle includes a 12" (30 cm) pull-out extension tube to glossy finish
control product flow, saving time and money. Available in a range of PRS50105 Matte finish
temperatures for leak detection in all seasons and all systems.
Part No. Description Size
PRS50205 Regular temperature Type I (+27 to 200 °F) (-3 to 93 °C) 8 oz (236 ml)
PRS50206 Regular temperature Type I (+27 to 200 °F) (-3 to 93 °C) 1 gal (3.7 l)
PRS50207 Low temperature Type II (-65 to 200 °F) (-54 to 93 °C) 8 oz (236 ml)
PRS50208 Low temperature Type II (-65 to 200 °F) (-54 to 93 °C) 1 gal (3.7 l)

D16 1-800 225 8247 www.praxairwelding.com