Page 200 - Praxair Productivity Catalog

WELDING AUTOMATION

Column & Boom Manipulators

High Productivity Vibrationless Boom TYPICAL MAX DEPOSITION RATES*
Welding Deposition Rates Up To 80 pounds/hour!
Single Weld Head Dual Weld Head
SINGLE WIRE Up to 25 lbs./hr Up to 50 lbs./hr

TANDEM WIRE Up to 40 lbs./hr Up to 80 lbs./hr
* Using 1,000 amp sub-arc power source

PRSMN6100 PRSMN16100S
PRSMNC4100

4 ft. × 4 ft. 4 ft. × 5 ft. 6 ft. × 6 ft. 9 ft. × 9 ft. 12 ft. × 12 ft. 16 ft. × 16 ft.
SPECIFICATIONS
PRSMNC4100 PRSMNP600 PRSMN6100 PRSMN9400 PRSMN12200 PRSMN16100
LOAD CAPACITY 250 lbs. 250 lbs. 500 lbs. 500 lbs. 500 lbs. 250 lbs.
(AT BOOM END)
BOOM STROKE 48 in. 42 in. 72 in. 108 in. 144 in. 192 in.
COLUMN STROKE 48 in. 58 in. 72 in. 108 in. 144 in. 192 in.
BOOM, MAST, TRAVERSE 5 – 120 in/min (all models)
& TRAVEL CAR SPEED
POWER REQUIREMENTS 110 V, 1-ph* 480 V, 3-ph* 480 V, 3-ph* 480 V, 3-ph* 480 V, 3-ph* 480 V, 3-ph*
SHIPPING WEIGHT 1,900 lbs. 4,400 lbs. 7,500 lbs. 8,500 lbs. 9,000 lbs. 9,500 lbs.
*208 - 600V, 50 or 60 Hz input power options available. Equipment mass not including attachments. Specifi cations subject to change without notice. Consult your Praxair representative
when ordering.

Available Options
Control platform (joystick or fully integrated
touchscreen options)
SAW or GMAW welding systems (single, twin,
or tandem wire)
Cold wire TIG systems
Powered cross slides (1 or 2 axis)
Weld camera systems (saw or open arc)
Seam tracking (vision/laser or tactile/mechanical)
Travel car (powered or manual)
Pre-heating system (rolling induction heater)
Flux recovery and delivery systems
Dual saw or MIG/SAW set-ups

D40 1-800-225-8247 www.praxairusa.com