Specialty Applications for Orbital Welding
Turntable System - Turn 300
This welding turntable system is particularly suitable for non orbital-ready components at higher quantities. The Turn 300 can be connected to all Orbitec controllers.
- Hollow shaft OD 70 mm (purge components through center)
- Quick-change orbital TIG torch system
- Bit tilts to any 90° angle
- High quality three-jaw chuck
Package Includes:
- Turntable and console
- 2 sets of jaw chucks
- Bed plate and positional plate
- Multi-positional welding torch arm provides infinite adjustment
- TIG torch bracket, cable, chuck key, ground cable
| Part No. | Load | Swivel Range | Current Transmission | Chucking Capacity Inner | Chucking Capacity Outer |
|---|---|---|---|---|---|
| Turn 300 | Max 300 N | 0° - 90°, infinitely variable | Max 300 | 50 mm - 230 mm 1.970 in. - 9.060 in. | 10 mm - 120 mm 0.394 in. - 4.720 in. |
Tube-to-Tube-Sheet Weld Heads - RBK 20
With tube-to-tube-sheet weld heads, the reproducible welding of tubes to tube sheets is possible at consistent high quality with or without external welding wire. Tubes to be welded may be flush with the tube sheet, offset, protrude, or located in the rear sheet. The lightweight, easy-to-use RBK 20 comes with a water-cooled torch. The optional cold wire feed is static at the head (does not turn).
Package Includes:
- RBK weld head
- Water-cooled cable assembly
- Three-point support (support ring optional)
- Torch equipment
- Tool kit
| Part No. | Field of Application | Welding Current | Wire Motor | Rotation Speed | Wire Coil | Wire Diameter | Weight (without wire feed) | Weight (with AVC) |
|---|---|---|---|---|---|---|---|---|
| RBK 20 | ID 9.8 mm - 78 mm / 0.3585 in. - 3.070 in. | Max 200 A | 24 VDC Tacho | 5 rpm | 1 kg, 100 mm. dia. | 0.6 mm - 1.2 mm | 8 kg | 11 kg |