ProStar™ Hydraulic Press Brake - PRSBP5060NC
The Press Brake Designed for the Small to Medium-Sized Fabricator
Linde's ProStar™ PRSBP5060NC hydraulic sheet-metal press brake is easy to use and well built. It ships standard with a complete set of production-style, single-vee tooling.
Both the upper beam and the back gauge on this two-axis NC bender are encoder-controlled for precision. The upper beam is actuated downward by two heavy, industrial hydraulic cylinders. A hardened track includes three axes of bearings, while a parallel mechanism forces synchronization of top and bottom dies. These features ensure accurate, quality bends across the beam width.
Three operating modes will assist you from setup to full production. A rigid, electro-welded, plate-steel frame ensures precision accuracy and smooth production runs.
Electric Back Gauge with Manual Micrometer Adjustment
- Extra-wide guidelines for exceptional rigidity
- Adjustable two-step downward travel for higher productivity
- An oversized hydraulic tank and high-performance pump smooth and stabilize oil flow
- Photoelectric safety curtain
- Accepts any standard press brake tooling
- Vertical positioning via electronic encoder and mechanical stops
Standard Configuration
| Part No. | Maximum Capacity | Bending Capacity (max length @ max thickness) | Distance Between Housing | Distance from Table to Ram | Throat Depth (to housing) | Stroke Distance | Approach Speed | Bending Speed | Return Speed | Gauge Length | Main Motor | Back Gauge Motor | Power Requirements | Oil Capacity | Dimensions (L/W/H) | Shipping Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PRSBP5060NC | 50 tons | 61 in. / .118 in. | 49.21 in. | 11.81 in. | 7.87 in. | 5.9 in. | 3.14 in./sec. | .275 in./sec. | 2.36 in./sec. | 23.62 in. | 5 hp | 1/2 hp | 220 V 3-hp | 28 gal | 74.80 in. x 51.18 in. x 86.61 in. | 2,640 lbs. |
Specifications subject to change without notice.