Categories
Welding Wire & Electrodes
Welding Wire Solid Welding Wire Flux-Cored Welding Wire Metal-Cored Welding Wire Submerged Arc Welding Wire
Welding & Cutting Equipment
Oxy Actylene Welding & Cutting Lighters & Flints Oxy Acetylene Welding & Cutting Torches Oxy Acetylene Welding & Cutting Outfits Quick Connectors Oxy Acetylene Welding & Cutting Torch Attachments Flashback Arrestors Oxy Acetylene Welding & Cutting Torch Handles Burning Bars & Lances Oxy Acetylene Cutting Machine Accessories Oxy Acetylene Cutting Machines
Abrasives
Safety & PPE
Protective Clothing Welding & Fire Resistant Clothing High Visibility Vests & Jackets Aluminized Clothing
Welding Helmets & Lenses Welding Lenses, Filters & Covers Welding Helmets Welding Helmet Replacement Headgear Welding Helmet Accessories
Welding & Cutting Consumables
MIG Welding Consumables MIG Contact Tips MIG Nozzles MIG Diffusers MIG Liners MIG Insulators MIG Drive Rolls Mig Conductor Tubes MIG Consumable Kits
TIG Welding Consumables Tungsten Electrodes TIG Cups TIG Collet Bodies TIG Collets TIG Torch Back Caps TIG Insulators & Gaskets TIG Gas Lenses TIG Consumables Kits TIG Nozzles
Plasma Cutting Consumables Manual Cutting Consumables Manual Plasma Torch Electrodes Manual Plasma Torch Nozzles Manual Plasma Torch Shield Caps Manual Plasma Torch Tips Manual Plasma Torch Retaining Caps Manual Plasma Torch Swirl Rings Manual Plasma Torch Start Cartridges Manual Plasma Torch Consumables Kits Manual Plasma Torch Deflectors Manual Plasma Torch O-Rings Manual Plasma Torch Diffusers Manual Plasma Torch Collets
What are the Different Type of MIG Gases?
Carbon Steel
StarGold C-10
StarGold C-15
StarGold O-5
| Metal | Gauge | Mode of Metal Transfer | Recommended Gas | Comments |
|---|---|---|---|---|
| Carbon Steel | Up to 1/8" | Short Arc | StarGold C-25 MIG Mix Gold | Good penetration/gap bridging ability |
| Carbon Steel | Up to 1/8" | Pulsed Spray | StarGold C-5 Stargon CS | Higher deposition rates without burnthrough; minimum spatter; good puddle control out-of-position |
| Carbon Steel | Over 1/8" | Short Arc | StarGold C-25 MIG Mix Gold | High welding speeds, good penetration and puddle control; applicable for out of position welds |
| Carbon Steel | Over 1/8" | Short Arc and Globular Arc (Buried Arc) | CO2 | Deep penetration and fast travel speeds but with higher burnthrough potential and more spatter; high current mechanized welding |
| Carbon Steel | Over 1/8" | Spray Arc | StarGold C-25 MIG Mix Gold | Good arc stability; produces a more fluid puddle as O2 equivalent increases; good coalescence and bead contour; good weld appearance puddle control, low spatter |
| Carbon Steel | Over 1/8" | Short Circuiting and Spray Transfer | StarGold C-15 Stargon CS StarGold C-25 MIG Mix Gold | Applicable to both short circuiting and spray transfer modes; has wide welding current range and good arc performance; weld puddle has good control which results in improved weld contour |
| Carbon Steel | Over 1/8" | Pulsed Spray | StarGold C-5 Stargon CS | Used for both light gauge and out of position weldments; achieves good pulsed spray stability over a wide range of arc characteristics and deposition ranges |
Coated Steels
| Metal | Gauge | Mode of Metal Transfer | Recommended Gas | Comments |
|---|---|---|---|---|
| Coated Steels | All | Short, Spray and Pulsed | HeliStar GV |
|
Stainless Steel
| Metal | Gauge | Mode of Metal Transfer | Recommended Gas | Comments |
|---|---|---|---|---|
| Stainless Steel | Up to 1/16" | Short Circuiting | Stargon SS StarGold C-2 | Good control of burnthrough and distortion; used also for spray arc welding; puddle fluidity sometimes sluggish, depending on the base alloy |
| Stainless Steel | Over 1/16" | Short Circuiting Transfer | HeliStar A-1025 Stargon SS HeliStar SS | Low CO2 percentages in each mix minimize carbon pick up, which can cause intergranular corrosion with some alloys; helium improves wetting action; applicable for all position welding |
| Stainless Steel | Over 1/16" | Spray Arc | HeliStar SS Stargon SS StarGold 0-1 | Good arc stability; produces a more fluid but controllable weld puddle; good coalescence and bead contour; minimizes undercutting on heavier thickness |
| Stainless Steel | Over 1/16" | Pulsed Spray | HeliStar SS Stargon SS StarGold 0-1 | Used for both light gauge and heavy out-of-position weldments; achieves good pulsed spray stability over a wide range of arc characteristics and deposition ranges |
Aluminum
| Metal | Gauge | Mode of Metal Transfer | Recommended Gas | Comments |
|---|---|---|---|---|
| Aluminum | Up to 1/2" | Spray Arc | Argon | Best metal transfer, arc stability, and plate cleaning; little or no spatter; removes oxides when used with DCEP (Reverse Polarity) |
| Aluminum | Up to 1/2" | Spray Arc | HeliStar A-25 | High heat input; improves puddle fluidity; flat bead contour and deep penetration; minimizes porosity |
| Aluminum | Over 1/2" | Spray Arc | HeliStar A-25 HeliStar A-50 | High heat input; good for mechanized welding and overhead; applicable to heavy section welding |
| Aluminum | Over 1/2" | Pulsed Spray | Argon | Good wetting; good puddle control |
Nickel and Copper Nickel Alloys
| Nickel and Copper/Nickel Alloys | Up to 1/8" | Short Circuiting | HeliStar SS StarGold 0-1 | Good arc stability; weld puddle control and wetting |
| Nickel and Copper/Nickel Alloys | Over 1/8" | Short Circuiting | HeliStar SS HeliStar A-1025 | Higher heat input of helium mixtures offsets high heat conductivity of heavier gauges; good wetting and bead contour; can be used for out of position welding |
| Nickel and Copper/Nickel Alloys | Over 1/8" | Pulsed Spray | HeliStar SS HeliStar A-75 Argon | Used for both light and heavy gauge out of position weldments; achieves good pulsed spray stability over a wide range of arc characteristics and deposition ranges |