ProStar™ Plasma Cutting Table - PRS200

 

ProStar™ PRS200 CNC plate cutting system features a dual-drive, robust design with pedestal-mounted rails and advanced motion control for use of conventional or high-definition plasma. The CNC controller provides all of the functions required for oxy-fuel and plasma cutting, including file conversion. To achieve superior cut quality on thicker materials, ask your local Linde representative about installing this high-amperage, high-definition and easy-to-use plasma cutting system.

 

Standard Equipment

  • Dual side-drive gantry and high-powered 650W AC brushless drives
  • Welded, stress-relieved machine bridge beam
  • Hypertherm® EDGE  Connect® numerical control with software, USB interface and wireless networking
  • Rack and pinion drive with precision planetary gear boxes
  • 2 in. stainless steel drive band for slave/mirror image cutting
  • 18 homing positions and procedures to square gantry during setup
  • Rail-cleaning air blast and wiper system
  • 11 bearings and multiple adjustments for providing smooth, accurate motion
  • Elevated 30 lbs./ft. machined "T" rails with adjustable leveling pads
  • 17 in. active matrix LCD touchscreen
  • Built-in water table height control
  • Power track guide to protect hoses and cables 
  • Heat shields to protect and hoses from sparks
  • Three-part automotive paint finish
ProStar Plasma Cutting Table PRS200

Standard Configuration

Part No.Cutting WidthCutting Length

Lifter Speed:

Plasma

Lifter Speed:

Oxy-Fuel

Machine Speed:

Traversing

Machine Speed:

Contouring

Cutting Capacity:

Plasma

Cutting Capacity:

Oxy-Fuel

Maximum Stations:

Plasma

Maximum Stations:

Oxy-Fuel

PRS2006 ft. - 10 ft. 10 ft. - 50 ft.1,000 ipm70 ipm1 ipm - 1,000 ipm1 ipm - 500 ipm

Up to 2 in. mild steel

Up to 2 in. aluminum and stainless steel

Up to 4 in.24

Specifications subject to change without notice.