CO2 Laser Regulators Kits 

Linde's regulator start-up kit is designed to work specifically with CO2 lasers. These regulators feature helium holding integrity of 1×10-8 scc of helium per second, stainless steel diaphragms and built-in 10 micron filters, unless otherwise specified.

Easy installation and testing.

The regulator start-up kit includes all regulators, connections and hoses. Two gas line particle testers are also included to verify that the copper oxygen and nitrogen assist gas lines were properly installed and are free of copper oxide ash.

LaserStar 2×2 Switchover

For Flexible Manufacturing Systems (FMS), or a multiple laser installation, the exclusive Linde 619 switchover has a helium holding integrity of 1×10-9 scc of helium/ second. This switchover is ported with four inlets for use with 2 to 4 cylinders of resonator gases per switchover. The kit includes two pigtails for each gas type. Two of the inlet ports are plugged for later expansion.

Pigtails

• BRK 220252124H36320
• BRK 220252124H36580
  

Option

• Stainless steel tubing from switchover to laser: LSU25T316L, qty. 20 ft.

LASERSTAR™ HPS One Oxygen Assist Gas Regulator Assembly

Inlet Connection CGA 540 (or 1/4 in. FNPT)

LASERSTAR HPS One Beam Purge Gas Regulator Assembly 

Inlet Connection CGA 580 (or 1/4 in. FNPT)

LASERSTAR HPT One to Three Resonator Gas Regulator Assemblies

Inlet Connections

• 1 x CGA 320 (or 1/4 in. FNPT)
• 2 x CGA 580 (or 1/4 in. FNPT)

LASERSTAR K10 One Nitrogen Assist Gas Regulator Assembly

Inlet Connection CGA 580 (or 1/2 in. FNPT) up to 2,900 psig inlet

For lights-out operations or multiple lasers, add FMS to the part number to replace the resonator gas regulator with the 2×2 switchover.